Back to All Events

Aquafeed Extrusion Technology, South America (Chile)


  • UC Temuco Continuing Education Centre Avenue Rudecindo Ortega Temuco, Araucanía Chile (map)

Unfortunately we have had to cancel our Chile courses for 2023. Please be assured they will be available in October 2024. Details to follow in the coming months.

› Para la versión en español de esta página web, haga clic aquí.

This short course is presented by Dennis Forte & Associates in conjunction with The Faculty of Natural Resources, Catholic University of Temuco, Chile.

A Food & Feed Drying Technology program is also being offered with additional discounts for those attending both courses.


Overview


The course will be presented in English with simultaneous translation into Spanish.

This 3-day course covers the principles of extrusion, the design of extrusion processes for aquatic feeds, as well as how the formulation interacts with the extrusion process. Principles learned will be demonstrated through an exercise run on a pilot extruder.

The program provides a good background in general extrusion technology, but is specifically directed at aquafeed extrusion. The course is relevant to both single and twin screw extrusion technology.

The course will cover topics from the basics of extruders and their configuration, through what is happening chemically and physically inside the extruder barrel, to an understanding of extruder dies and extruder instability.

Topics covered include —

  • Principles of extruder configurations (single and twin screw)

  • Role of rheology in extrusion

  • Die types and effects, die design

  • Extrusion chemistry – Recipe design

  • Product density control

  • Preconditioning for Extrusion

  • Causes and effects of extruder instability

  • Screw, barrel, and die-plate wear

  • Extrusion troubleshooting


Examples in product formulation and the design of extrusion processes will be included to demonstrate application of the theory. Principles learned will be applied during the practical demonstration on Day 2. Important aspects of peripheral systems (eg raw materials pre-processing, preconditioning) are also covered.

PDF notes directly relevant to the presentations will be provided prior to course commencement. Participants can order a more detailed hardcover text book at additional cost.


Who Should Attend?


This program is relevant to technical staff interested in the formulation of extruded aquafeeds and the use of extrusion technology for aquafeed production. The program takes participants from the basics of what extrusion is and what it can do, through to a detailed understanding of the design of formulations and processes, and the operation and troubleshooting of extrusion systems.


Sponsorship


We appreciate support/sponsorship from companies involved in providing equipment and services relevant to Extrusion or Aquafeed.


Registration Fee


1100 USD per person
 

The registration fee is set in US dollars and will vary when converted to other currencies according to fluctuations in exchange rates.

AVAILABLE DISCOUNTS


A 10% discount applied for registrations received by 8 SEPTEMBER, 2023

An additional 10% discount applies for those attending consecutive courses.

An additional 5% discount applies for three or more course registrations received together from the same company.

Special fees for PhD students and non-profit research organisations (limited places available).

Advise on registration form if claiming special fee:

PhD Students – 630 USD (or equivalent in other currency). Advise which University you are enrolled in at registration.

Non-profit Research Organisation (including University staff) – 880 USD

The registration fee includes handout notes directly relevant to the presentations & will be provided prior to course commencement.

REGISTRATIONS CLOSE  6 OCTOBER, 2023

To book places at this course, click below to access the registration form.

We will confirm your registration and send an invoice for your registration fees. Fees must be paid prior to the course.

ALL PAYMENTS MUST BE RECEIVED BY 16 OCTOBER, 2023

OUR CANCELLATION POLICY


Fees, less a 15% handling charge, will be refunded if participants cancel their registration prior to the closing date for registrations. Fees will not be refunded after that date, but a substitute participant will be accepted at any time.

We reserve the right to cancel or postpone the course if necessary (e.g. due to insufficient registrations). In this case a full refund of fees will be available. Dennis Forte & Associates liability is limited to the registration fee only, and Dennis Forte & Associates cannot be held liable for air fares, accommodation, or other related expenses.


Venue


UC Temuco Continuing Education Centre
Avenue Rudecindo Ortega
Temuco 02351, Chile

 

Accommodation


Participants must organise their own accommodation. There are numerous options in Temuco. Following is a selection at a range of prices and locations.

HOTELS & RATES


Close to the University (10-15 minutes or less):

Hostal Loft de Campo EL Laurel
Holiday Inn
Hotel Diego de Almagro Temuco

Close to most restaurants and mall (30 minutes from University):

Hostal Selva Negra
Hotel Dreams Araucania
Apart Hotel Aragon
Hostal Plaza Las Banderas
Small Hotel Goblin´s House


What Participants Need to Bring


For safety and hygiene reasons, all visitors are requested to comply with the following clothing protocols on the second day for the demonstration:

  • flat, fully enclosed footwear, or steel-toed industrial safety shoes, are to be worn

  • full leg coverage (ie trousers) is required. Skirts, short pants or 3/4 length trousers are not suitable

  • you will be provided with a visitor dust coat and hair net

  • you will be asked to remove watches and all jewellery other than solid bands.

We also suggest usual items such as notepad, pen or pencil, and highlighter.


Further Information & Enquiries


Visit our Contact page.

Adrian Hernandez
Catholic University of Temuco (Chile)
Ph +56-45-2553905, 2205511


Course Presenter


Mr Dennis Forte, a chemical engineer with extensive experience in extrusion processing and die design, including aquafeed production. Dennis has worked with a wide variety of companies and extruded products.


Books by Course Presenter


Available to course participants at 20% discount to list price. If pre-ordered (see option on Registration Form), a copy will be provided at the course. Limited spare copies will also be available for perusal/purchase at the course until sold out (orders at the same book cost, plus delivery, will be accepted for delivery after the course).

Food & Feed Extrusion Technology:
An Applied Approach to Extrusion Theory

This book provides background on extrusion technology relevant to all types of extruded food products.
› Hardcover USD220 or equivalent


The Design of Food Extrusion Dies

This book is unique in providing specific guidance on die design, with worked examples and tutorials.
Hardcover USD260 or equivalent


Food Extrusion Process Scale-Up & Process Transfer:
Witchcraft or Science?

Scaling an extrusion process involves an understanding of many process variables. This book shows how scientific and engineering principles can be used to achieve the required outcome.
Hardcover USD250 or equivalent

Food & Feed Drying Technology: A Practical Approach

This book provides practical information on different drying technologies used across the range of food and feed products. It includes design procedures with examples from the authors’ industrial experience.

Hardcover USD235 or equivalent

Shipping -

› Additional CLP20,000 or equivalent delivery per order (this may be higher if multiple books are purchased).
› Some jurisdictions may apply additional import duties, charged directly to the receiver of the book/s.


Join our mailing list

For information on extrusion related courses please subscribe to our mailing list, now managed by Dennis Forte & Associates.